≡ menu
  • PL EN       fb yt ico

  • logo venifloor gora nad menu

  • PL EN       fb yt ico


    Do you have questions?
    Need technical support?
    phone ico+48 884-660-660

  • Do you have questions?
    Need technical support?
    phone icon +48 884-660-660

Maintenance of VENIFLOOR flooring


Care of Venifloor veneer flooring is extremely simple. It is enough to remember a few basic rules regarding the systematic use of specific care products in order to be able to enjoy the beauty and elegance of precious wood for a long time.

 


STAGE
 

I. Daily care
 

II. Periodic care
 
How often? * Every week or more often Every 3 or 6 month
Product WOCA Vinyl soap WOCA intensive cleaner WOCA polish
Tools Broom or vacuum cleaner equipped with a soft tip with bristles; wet mop; two buckets Moist mop; clean cloth; two buckets Painted cuvette; flat mop
Sposób użycia 1. Vacuum the floor
2. Mix 125 ml of the product with 5 l of water
3. Clean the floor with a firm squeeze
4. We recommend working with two buckets - one with clean water to squeeze the mop and the other - with a soap solution
5. Remember not to leave any water on the floor surface after cleaning it
1. Complete the steps from stage I.
2. Mix 125 ml of the product with 5 l of water
3. Wash the floor with a mop pressed firmly
4. We recommend working with two buckets - one with clean water to squeeze the mop and the other - with the remover solution
5. Remember not to leave any water on the flooring surface after cleaning it
6. Pour the product into the paint tray without diluting it
7. Apply with a flat mop or applicator in the form of a thin layer
8. Before putting the floor into service, leave it to dry for approx. 30 minutes. Only after this time flooring care is finished
Uwagi dodatkowe Intensywnie zabrudzone deski lub trudne do usunięcia plamy można usunąć przy pomocy środków Intensywny Zmywacz do drewna lub Odplamiacz Spray Mocne plamy starannie usuń szmatką Uwaga! Nie należy kontynuować nanoszenia WOCA Lakier pielęgnacyjny, gdy podłoga zaczęła już wysychać!


* Suggestions relating to the frequency of flooring care are indicative and are not dependent on the actual operation of the boards. Therefore, they can not constitute grounds for complaints.

Warning!
We advise against the use of "universal" clearing agents because they usually contain silicone, which can adversely affect the lacquer layer of the flooring, causing it to tarnish or discolor. Also, acetone-containing products should not be used.

 

  • If you want to know what you stand at, you should know that Venifloor
    flooring melds all the best from both solid and laminate boards.

     

    2

    Warmth of wood

    Wood accompanies human beings from the year dot as a natural feedstock to build and design. One of its special assets is warmth.

    Wood as a natural feedstock provides thermic isolation of room - both visual and usable.

    Moreover, wood is a perfect element of every room; it clears up its look and emphasizes refined items used in decoration.

    Wooden flooring will heat up every house

    2

    Beautiful and natural look of wood

    The size of Venifloor board exposes beautiful and natural look of wood.

    Our flooring is emphasized by 4-directional V-fugue. This highlights its esthetic advantages.

    What’s more, Venifloor board stands out with unique width (21 cm).

    2

    Fast installation without glue

    Thanks to lock of fast montage's our flooring can be installed in a twinkling, comfortably and without glue.

    The lock of fast montage’s uses in Venifloor flooring is an intellectual properity of Venifloor brand

    (OHIM number 002693481-00).

    2

    6 lacquer layers for even better protectiony
    Flooring is covered with 6 layers of UV laquers which are great supporters of everyday life.

    In addition, flooring offered by Venifloor is covered with laquer mixed with CORUNDUM (aluminum oxide) which make it abrasion-resistant.

    CORUNDUM is a mineral used in production of e.g. polishing tools and stands out with unique assets in hardness. According to the currently holding knowledge, Venifloor is the only Polish brand which uses the advantages of CORUNDUM in manufacturing floor boards.

    Lacquer finishing and presence of CORUNDUM facilitate upkeep and protect wood for years. They make also a specific, protective filter on floor’s surface and slipping-protection. That finishing does not harten flooring, but protects it from dust, abrasion and scratching.

    It also cooperates elastically with wood.

    2

    Resistance

    The flooring’s core is made of resistant HDF board.

    Thanks to this flooring offered by Venifloor is more resistant to hits than flooring with thicker layer of wood or solid flooring. It’s all possible, because during the advanced process of production HDF board changes its structure of inner wood. 2-layer or 3-layer floors are made by means of crisscross pattern.

    It means that wood – for avoid dwindling – is glued alternately endlong and transversally under the wear layer. A flooring with HDF-core board is a one step further than layered flooring or solid flooring, because it is created thanks to wood grinding. Then it loses a tendency to dessicating/ contraction.

    Such compacting of wood under very high pressure along with glues and resins serves of getting high density – starting from 900 kg/ m3. This is the grounding for such big indent-resistance as well as resistance from dampness of rooms.

    The reaserches prove that oak board from Venifloor is 41% harder than layered oak board.


    See more at: Venifloor researches.

    2

    Rational wood usage in manufacturing process

    By choosing flooring Venifloor, you support ecology. Thanks to the rational usage of wood, we protect tree stands and – at once – enjoy the flooring made of natural wood.

    From the 1 precious tree, Venifloor can make 15 sqm of flooring (15 trees for one solid flooring, Venifloor – 1 tree). Board’s production based on dignified, valuable wood species is surrounded by nature-care. Rationalization of wood usage during board’s production pushes the protection of tree stands what conduces concern for environment.

    With Venifloor flooring, we can enjoy the real wood on the floor and forests during walks.

    2

    Long-time warranty of product's solidity

    Solidity of our product is connected with long-time guarantee.

    It is just a safeguard claim of our product’s reliability we are sure.

    Get to know Terms of use and Terms of guarantee (LINK).

    2

    Attractive price

    A price of veneer flooring is on level of PVC flooring’s price; at the same time, the price is lesser than price of 1-strip solid flooring with comparable width of strip thanks to lesser usage of precious wood.

    By using this method, Venifloor offers the original wood at price of copy, using lesser wood and reducing production’s costs at once.

    2

    Perfect thermal parameters

    Venifloor flooring can be used on underfloor heating.

    Under the influence of heat the flooring does not deform and a satisfactory – as for a wooden floor – the value of heat transfer coefficient means that the flooring conducts and maintains the temperature (due to its thicknes; the thinner the board, the better the permeability).

    In addition, thermal resistance for board Venifloor at thickness of 9,2 mm is definitely lesser than in case of 3-layered board at thickness of 14,3 mm and amounts to respectively 0,085 W/K*m2 i 0,132 W/K*m2.

  • If you want to know what you stand at, you should know that Venifloor flooring melds all the best from both solid and laminate boards.
     


     

    X

    Warmth of wood

    drewno icons

    Wood accompanies human beings from the year dot as a natural feedstock to build and design. One of its special assets is warmth.

    Wood as a natural feedstock provides thermic isolation of room - both visual and usable. Moreover, wood is a perfect element of every room; it clears up its look and emphasizes refined items used in decoration.

    Wooden flooring will heat up every house.

    X

    Beautiful and natural look of wood

    panel icons

    The size of Venifloor board exposes beautiful and natural look of wood.

    Our flooring is emphasized by 4-directional V-fugue.

    This highlights its esthetic advantages. What’s more, Venifloor board stands out with unique width (21 cm).

    X

    Fast installation without glue

    montaz icons

    Thanks to lock of fast montage's our flooring can be installed in a twinkling, comfortably and without glue.

    ZThe lock of fast montage’s uses in Venifloor flooring is an intellectual properity of Venifloor brand

    (OHIM number 002693481-00).

    X

    6 lacquer layers for even better protection

    odpornosc icons

    Flooring is covered with 6 layers of UV laquers which are great supporters of everyday life.

    In addition, flooring offered by Venifloor is covered with laquer mixed with CORUNDUM (aluminum oxide) which make it abrasion-resistant. CORUNDUM is a mineral used in production of e.g. polishing tools and stands out with unique assets in hardness.

    According to the currently holding knowledge, Venifloor is the only Polish brand which uses the advantages of CORUNDUM in manufacturing floor boards. Lacquer finishing and presence of CORUNDUM facilitate upkeep and protect wood for years. They make also a specific, protective filter on floor’s surface and slipping-protection.

    That finishing does not harten flooring, but protects it from dust, abrasion and scratching. It also cooperates elastically with wood.

    X

    Resistance

    twardosc icons

    The flooring’s core is made of resistant HDF board. Thanks to this flooring offered by Venifloor is more resistant to hits than flooring with thicker layer of wood or solid flooring.

    It’s all possible, because during the advanced process of production HDF board changes its structure of inner wood. 2-layer or 3-layer floors are made by means of crisscross pattern. It means that wood – for avoid dwindling – is glued alternately endlong and transversally under the wear layer. A flooring with HDF-core board is a one step further than layered flooring or solid flooring, because it is created thanks to wood grinding.

    Then it loses a tendency to dessicating/ contraction. Such compacting of wood under very high pressure along with glues and resins serves of getting high density – starting from 900 kg/ m3. This is the grounding for such big indent-resistance as well as resistance from dampness of rooms.

    The reaserches prove that oak board from Venifloor is 41% harder than layered oak board.

    See more at: Venifloor researches.

    X

    Rational wood usage in manufacturing process

    eco icons

    By choosing flooring Venifloor, you support ecology. Thanks to the rational usage of wood, we protect tree stands and – at once – enjoy the flooring made of natural wood.

    From the 1 precious tree, Venifloor can make 15 sqm of flooring (15 trees for one solid flooring, Venifloor – 1 tree). Board’s production based on dignified, valuable wood species is surrounded by nature-care. Rationalization of wood usage during board’s production pushes the protection of tree stands what conduces concern for environment.

    With Venifloor flooring, we can enjoy the real wood on the floor and forests during walks.

    X

    Long-time warranty of product's solidity

    gwarancja icons

    Solidity of our product is connected with long-time guarantee.

    It is just a safeguard claim of our product’s reliability we are sure.

    Get to know Terms of use and Terms of guarantee (LINK).

    X

    Attractive price

    cena icons

    A price of veneer flooring is on level of PVC flooring’s price; at the same time, the price is lesser than price of 1-strip solid flooring with comparable width of strip thanks to lesser usage of precious wood.

    By using this method, Venifloor offers the original wood at price of copy, using lesser wood and reducing production’s costs at once.

    X

    Perfect thermal parameters

    cieplo icons

    Venifloor flooring can be used on underfloor heating. Under the influence of heat the flooring does not deform and a satisfactory – as for a wooden floor – the value of heat transfer coefficient means that the flooring conducts and maintains the temperature (due to its thicknes; the thinner the board, the better the permeability).

    In addition, thermal resistance for board Venifloor at thickness of 9,2 mm is definitely lesser than in case of 3-layered board at thickness of 14,3 mm and amounts to respectively 0,085 W/K*m2 i 0,132 W/K*m2.

  • Where to buy?
    Look for our partner
    in your region
    >

  • gdzie kupic mapa ikona pl 


  • Customer Advisor:


       phone2+48 884-660-660    phone2+48 730-203-033    phone2+48 696-509-219

    e-mail:
    biuro@venifloor.com

     

  • fb yt ico