Venifloor X – integrated wood panels with underlay
Venifloor X is a veneered wood panel integrated with a mineral underlay, which responds to the needs of customers looking for technologically advanced solutions. This innovative product allows it to be used together with underfloor heating, while offering a wide choice of colours and wood species. In addition, Venifloor X has excellent acoustic performance and is easy to install.
The Venifloor X integrated floor panel is available as:
- Veni X Classic Oak, flooring panel with integrated underlay
- Veni X Oak Rustic, flooring panel with integrated underlay
- Veni X Natural Oak, lflooring panel with integrated underlay
- Rustic Oak, price PLN 329.90 per m2
- Classic Oak priced at PLN 349.90 per m2
- Natural Oak in the price of PLN 349.90 per m2
Technical parameters:
- board size – 1215 x 170 mm
- package contains – 1.24 m2
The Venifloor X panel was awarded the gold medal of the BUDMA International Fair. This distinction is awarded to innovative products, solutions and services from the construction and architecture sectors that use modern technologies, innovative methods or the highest quality materials. Venifloor was recognised for the innovation of its product Venifloor X.
More information about the BUDMA trade fair is available at:
Venifloor X – Gold medal of BUDMA 2020 fair – video report
Venifloor with gold medal of BUDMA 2020 fair
Mineral underlay in Venifloor X
The Venifloor X panel, which is integrated into the subfloor, uses a high-class mineral subfloor with very good acoustic properties and allows for installation on underfloor heating. Thanks to this construction, the wooden panels achieve excellent results in terms of all parameters regarding thermal conductivity and floor acoustics. Which parameters are we talking about? Below.
RWS PARAMETER
The RWS parameter (reflected walking sound) defines the reflected sound. It is expressed in percentages to which the relevant RWS classes are assigned. There are usually 4 classes of this parameter. Class 3 is awarded when the RWS value is below 20%. Class 2 when the RWS is between 20% and 25%. Class 1 when the RWS value is greater than 25% but less than or equal to 30%. Class 0 is the highest class awarded when the RWS is above 30%.
Mineral underlay glued on both sides has an RWS of as much as 51%, which means that the sound of the householder’s footsteps will be very well insulated.
IS PARAMETER
The IS (impact sound reduction) parameter measures the sound insulation – i.e. the sound reduction to the room below where the wooden panels are installed. The sound attenuation of the floor between floors depends on the value of this parameter, which is important for residents of multi-family buildings as well as storied single-family houses.
The IS for the double-sided glued mineral subfloor used in the Venifloor X panel is 19 dB.
Venifloor X panel construction
The Venifloor X panel contains up to six layers of lacquer enriched with alumina, making the top layer extremely scratch-resistant. Another layer is a natural wood veneer, which determines the final appearance of the panel. The veneer is attached to the HDF board with waterproof glue, which is both secure and provides an extremely stable bond.
The core of the X panel is a strong HDF board with a density of over 900 kg per cubic metre. This provides the floor with dent resistance, but also moisture resistance. Another layer is the natural veneer that stabilises the entire floor. It is connected by adhesive to a mineral underlay, which gives the panel its acoustic performance. The adhesive is applied to the underlay, which is covered with a protective film. After peeling it off, the panel with the backing can be directly glued to the subfloor.
Advantages of Venifloor X
INTEGRATION OF THE WOODEN PANEL WITH THE SUBFLOOR – SAVES TIME AND MONEY
Venifloor X wooden panels have been integrated with the underlay, so you don’t have to spend extra hours searching for the optimal underlay to lay on your underfloor heating. We have done it for you! In the process of designing Venifloor X, underlays were compared in order to choose the one that would allow the floor to maintain good thermal parameters and also have outstanding acoustic properties. Wood panels integrated with the subfloor also saves additional money spent on the purchase and laying of the subfloor.
EASY TO INSTALL WITH A QUICK FASTENER
Venifloor X wood panels are equipped with a quick fastener, which is the intellectual property of the manufacturer. This makes the installation process itself not only simple, but also fast.
USE ON A FLOOR WITH UNDERFLOOR HEATING
The Venifloor X integrated panel has been developed for use with underfloor heating. Thanks to Venifloor’s innovative product, you don’t have to choose between a floor created from natural wood and the functionality of underfloor heating.
EXCELLENT ACOUSTICS OF THE MINERAL SUBFLOOR
The Venifloor X panel has excellent acoustic performance, thanks to the use of a mineral underlay. The double-sided bonded mineral subfloor used for the X panel itself is characterised by extremely good results. The RWS parameter for its reflected sound is 51%. This means that the floor reflects footfall sound only slightly. This in turn contributes to the comfort of the home.
AN ECOLOGICAL SOLUTION
Venifloor cares about protecting noble stands of wood, which is why it bases its flooring method on the rational use of wood. Venifloor wood floors are created in an ecological way, saving as much as 30 times more precious wood stands than solid board manufacturers.
WIDE SELECTION OF WOOD PANEL TYPES
Venifloor’s customers have a wide choice of wood flooring, both in terms of choosing the right species and flooring colours. The range will include oak flooring, as well as beech flooring and much more.