Wooden ORIGINAL for the price of Laminate

Venifloor veneer flooring – This is the original at the price of a good laminate!

Veneer flooring is not an experiment but a conscious combination of proven technologies. It enjoys high recognition in Scandinavian countries, western Europe and in America. It is produced by the factories of large corporations. So far, this revolutionary product has not been widely represented on the Polish market. We see the reasons for this in its high price, which is generated mainly by the brand, not the actual production costs.

Table of Contents:

1. What is a veneer flooring?
2. Can the Venifloor flooring be renewed?
3. Another reason why the Venifloor floor will last many years
4. And what if something peculiar happens? Will an iron, knife or other object fall?
5. Veneer, Blockboard, HDF Board?
6. BOARD CONSTRUCTION
7. What are the types of finishing?
8. Is the Venifloor floor suitable for allergy sufferers?
9. Is it possible to use Venifloor floor underfloor heating?
10. What time of using the flooring does the guaratee include?
11. In which rooms can Venifloor boards be installed?
12. What are the other advantages of Venifloor flooring?
13. See what oil-wax coatings stand out
14. The most important advantages of oil-wax coating
15. Venifloor advices
16. Do it yourself

What is a veneer flooring?

Veneer flooring is not an experiment, but a conscious combination of proven technologies. It enjoys high recognition in Scandinavian countries, western Europe and in America. It is produced by the factories of large corporations. So far, this revolutionary product has not been widely represented on the Polish market. We see the reasons for this in its high price, which is generated mainly by the brand, not the actual production costs.

Can the Venifloor flooring be renewed?

– Yes! Like any wooden flooring, Venifloor flooring could be renovated. The only difference is the method of this renovation – thanks to the excellent parameters – Venifloor can be renewed faster and less cumbersomely than other wooden boards.

with Venifloor Scraping becomes History:

hardness + uncomfortable renewal + abrasion + price

It is worth knowing that:

The erroneous belief is that the wear layer of flooring is wood and the thicker the layer is, the better the flooring is. Meanwhile, a thicker layer of wood is needed practically only for the regeneration (standing/ scraping) of the floor in order to remove the deep dents created during its use. Then the sanding of the wood layer takes place to the depth of the dents.
Meanwhile, the used layer in each floor is not wood, but lacquer oil or wax. It is the layer that we walk on and it is exposed to the direct impact of everyday factors.
Venifloor uses up to 6 layers of ultra-resistant UV-lacquers with an admixture of CORUNDUM (aluminum oxide), which significantly extends the durability and life of the flooring.
It depends on the lacquer finishing mainly on how long the floor will serve.

Another reason why the Venifloor floor will last many years is HARDNESS.

Venifloor floor thanks to the use of a durable HDF core as a core (BRINELLA TEST) – like a good highway – is more resistant to mechanical damage and impacts, which means that we do not deal with deep dents – The effect? – Scraping/ sanding is not necessary.  

It is worth noting that the process of scraping involves not only high costs comparable to the costs of a new flooring, but also other inconveniences, such as the need to leave the premises for renovation, the unpleasant smell of fresh lacquer and the rising dust. In addition, the cost of scraping is close to the price of a new flooring and thus allows to exchange after many years, for example, the Classic Oak on American Walnut or another color of Venifloor Oak. An interesting addition to our strengths is the information that floors with over 2 mm of wood in the surface layer are inevitably exposed to the need for scraping already several years after installation.

And what if something peculiar happens? Will an iron, knife or other object fall?

The floor can be easily repaired with hard waxes that perfectly complement any cavity (see). Importantly, with veneer floorings, it is also possible, in case of damage, to replace a single board located anywhere on the floor. All this with minimal effort due to glueless, clean and quick installation.
In turn, if you want to refresh the floor, it is enough to use a 1-day floor renovation system (see).

In summary – if the floor has a UV-lacquer finishing enriched with CORUNDUM (or aluminum oxide), then any renovation will be postponed for many years, but if we add hardness, then the dents will not be so terrible anymore. These two parameters – resistance to abrasion and hardness – determine the durability of the floor, and thus – the need to renew it.
By choosing Venifloor, you can be sure that your floor will stay with you for longer, and you will not have to worry about its scraping or additional hardening.

Venifloor advices

After installing the floor, clean its surface of dust with a damp mop.

1. Protect furniture with felt pads.
2. Use specialized protective mats for furniture with wheels.
3. We recommend the use of doormats, e.g. before and after entering the house.
4. Remove sand and dust from the floor surface.
5. The floor should always be washed with a damp, but not dripping, mop. We recommend you read the Maintenance and renovation page.
6. During the renovation work, the flooring should be protected against damage (e.g. with corrugated cardboard). We recommend that you read the Terms of use.

Unique floors will delight not only ecology enthusiasts, but also users who, above all, value the functionality of the purchase and its exclusive design.

Do it yourself

On the hand-finished floor, each step will be unique.